RedNet Control 2: A Powerful Software for Networked Audio Systems
If you are looking for a way to control, monitor, and manage your networked audio devices with ease and efficiency, you might want to check out RedNet Control 2, a free software from Focusrite that works with their Red audio interfaces and RedNet devices. RedNet Control 2 is a software application that runs on your Mac or PC and allows you to access all the features and settings of your networked audio devices using a Dante network protocol. With RedNet Control 2, you can:
Organize and manage up to 600 devices in a tabbed, browser-like interface
Control and monitor input and output levels, routing, formats, clock settings, fan behaviour, network configuration, and more
Create and manage custom mixes for monitoring purposes
Use MIDI controllers to control mic pre devices
Save, recall, and load device and session snapshots
Use Dante Domain Manager (DDM) to assign different user privileges
Use AES67 and AES70 standards to interoperate with other audio networking systems
Run RedNet Control as a background application if needed
Update your devices firmware easily
In this article, we will show you how to download and install RedNet Control 2, how to use its various features and functions, and how it can enhance your workflow and productivity. Let's get started!
rednet control 2 download
DOWNLOAD: https://tinurll.com/2vxVnB
How to Download and Install RedNet Control 2
The first step is to download RedNet Control 2 from Focusrite's website. You can find it in the Downloads section of their website by selecting your product. The download file includes:
The RedNet Control application (updated to work on M1 systems using Rosetta)
A new driver for the Red range (updated to work on M1 systems natively)
A new version of Dante Controller (updated to work on M1 systems using Rosetta)
The installation process is simple and straightforward. Just follow these steps:
For Mac users:
Open the RedNet Control.pkg file and follow the installation steps provided by the installer.
Restart your computer when prompted.
Launch RedNet Control from the Applications folder or the Dock.
For PC users:
Open the RedNet Control.exe file and follow the installation steps provided by the installer.
Restart your computer when prompted.
Launch RedNet Control from the Start menu or the Desktop.
Once you have installed and launched RedNet Control 2, you will see a window that shows all the devices connected to your Dante network. You can now start organizing and managing your devices using the software.
How to Organize and Manage Your RedNet Devices
RedNet Control 2 has a user-friendly interface that allows you to easily navigate and access your devices. The interface consists of four main elements:
The tabbed interface, which lets you create and switch between different tabs that contain different groups of devices. You can rename, reorder, and delete tabs as you wish. You can also drag and drop devices between tabs to organize them.
The device list, which shows all the devices in the selected tab. You can sort the devices by name, type, model, or IP address. You can also select multiple devices by holding down the Shift or Command/Ctrl key and clicking on them.
The search bar, which lets you quickly find a device by typing its name, type, model, or IP address. You can also use filters to narrow down your search results by device type or status.
The auto function, which automatically creates tabs and groups devices based on their type, model, or IP address range. You can enable or disable this function by clicking on the Auto button in the top right corner of the window.
By using these elements, you can easily organize and manage your RedNet devices according to your preferences and needs.
How to Control and Monitor Your RedNet Devices
RedNet Control 2 also allows you to control and monitor various aspects of your RedNet devices, such as their status, settings, levels, routing, and more. To do this, you need to select a device from the device list and click on it to open its control panel. The control panel consists of four main elements:
The status icons, which indicate the device's network status, clock status, firmware status, fan behaviour, and power supply status. You can hover over each icon to see more details about it.
The channel clipping indication, which shows if any of the device's input or output channels are clipping. You can click on the clipping indication to reset it.
The ID function, which lets you identify a device by making its front panel LED flash. You can click on the ID button in the top left corner of the control panel to activate or deactivate this function.
The device settings, which let you adjust various parameters of the device, such as its name, IP address, sample rate, routing, input and output levels, formats, clock settings, fan behaviour, network configuration, and more. You can access these settings by clicking on the tabs at the bottom of the control panel.
By using these elements, you can easily control and monitor your RedNet devices and make sure they are working properly and efficiently.
rednet control 2.8.4 free download
rednet control 2.4 software update
rednet control 2 dante domain manager compatibility
rednet control 2 aes67 support
rednet control 2 aes70 compatibility
rednet control 2 aes3 kill switch function
rednet control 2 background mode
rednet control 2 firmware upgrade
rednet control 2 mac download
rednet control 2 windows download
rednet control 2 focusrite audio engineering ltd
rednet control 2 cue mixes to multiple output destinations
rednet control 2 rename cue mixes
rednet control 2 channel mapping trim level cross points increased
rednet control 2 output mutes behaviour change
rednet control 2 m1 compatibility for the red range
rednet control 2 d16 and d16r kill switch control
rednet control 2 x2p and am2 ultimo x aes67 compatibility
rednet control 2 midi control when software window is closed
rednet control 2 pc compatibility for red/thunderbolt users
rednet control 2 download link
rednet control 2 installation guide
rednet control 2 user manual
rednet control 2 system requirements
rednet control 2 troubleshooting tips
rednet control 2 latest version
rednet control 2 release notes
rednet control 2 review
rednet control 2 tutorial video
rednet control 2 features and benefits
rednet control 2 how to use with dante controller
rednet control 2 how to create and adjust cue mixes
rednet control 2 how to set up channel mapping and routing
rednet control 2 how to enable and disable aes3 kill switch
rednet control 2 how to run as a background application
rednet control 2 how to update firmware for specific devices
rednet control 2 how to access ddm privilege structure
rednet control 2 how to label each mix to match its output
rednet control 2 how to change output mutes to act as latching switches
rednet control 2 how to work with dolby atmos and other formats
rednet control 2 comparison with other software applications
rednet control 2 testimonials and feedback from users
rednet control 2 frequently asked questions and answers
rednet control 2 best practices and tips for optimal performance
rednet control 2 advantages and disadvantages of using it
rednet control 2 alternatives and competitors in the market
rednet control 2 pricing and availability information
rednet control 2 customer support and contact details
rednet control 2 forum and community discussion board
Clock Settings
One of the most important settings that you need to adjust for your RedNet devices is the clock settings. The clock settings determine how your devices synchronize with each other and with other audio sources. To access the clock settings, you need to click on the Clock tab at the bottom of the control panel. The clock settings consist of three main elements:
The sample rate, which determines how many samples per second are used to represent audio signals. You can choose from 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, or 192 kHz. The sample rate should match the sample rate of your audio source and destination.
The grand master nomination, which determines whether a device can be nominated as a grand master clock for the Dante network. The grand master clock is the device that provides a reference clock signal for all other devices on the network. You can choose from Enabled (the device can be nominated as a grand master), Preferred (the device is preferred over other devices for nomination), or Disabled (the device cannot be nominated as a grand master).
the bottom of the control panel. The tab consists of four main elements:
The mix list, which shows all the mixes that you have created. You can rename, reorder, and delete mixes as you wish. You can also select a mix by clicking on it.
The mix settings, which show the settings for the selected mix, such as the level, mute, dim, mono, polarity, delay, and EQ. You can adjust these settings by using the sliders, buttons, and knobs.
The mix routing, which shows how the selected mix is routed to any output channel of any device on your network. You can change the routing by clicking on a channel number and selecting a different output channel from a drop-down menu.
The mix channels, which show all the input channels that are included in the selected mix. You can add or remove channels by clicking on the plus or minus buttons. You can also adjust the level, pan, mute, and solo for each channel by using the sliders and buttons.
By using these elements, you can easily create and manage custom mixes for monitoring purposes and send them to any output channel of any device on your network.
How to Use RedNet Control with Dante Domain Manager
If you are using Dante Domain Manager (DDM) to manage your Dante network, you can use RedNet Control 2 to control your RedNet devices within the DDM domains. DDM is a software application that allows you to create and manage multiple domains on your Dante network, each with its own security, user roles, and device permissions. To use RedNet Control 2 with DDM, you need to do the following:
Install and configure DDM on your network according to its user guide.
Create and join a domain on DDM using your Mac or PC that runs RedNet Control 2.
Add your RedNet devices to the domain using Dante Controller or DDM.
Assign user roles and device permissions to your RedNet devices using DDM.
Launch RedNet Control 2 and log in to the domain using your DDM credentials.
Once you have done these steps, you will see only the devices that belong to the domain and that you have permission to access on RedNet Control 2. You can then use RedNet Control 2 as usual to control and monitor your devices. However, some functions may be restricted or disabled depending on your user role and device permissions. For example, you may not be able to change the device name, IP address, sample rate, or clock settings if you are not an administrator or if the device is locked by DDM. You can check your user role and device permissions on DDM or by hovering over the lock icon on RedNet Control 2.
How to Use RedNet Control with AES67 and AES70 Standards
If you want to interoperate with other audio networking systems that use AES67 or AES70 standards, you can use RedNet Control 2 to control your RedNet devices within these standards. AES67 is a standard that defines a common set of protocols for audio over IP interoperability. AES70 is a standard that defines a common set of protocols for audio device discovery, control, and monitoring interoperability. To use RedNet Control 2 with AES67 or AES70 standards, you need to do the following:
Enable AES67 mode on your RedNet devices using Dante Controller or RedNet Control 2.
Configure your network settings according to the AES67 guidelines.
Connect your RedNet devices to other AES67-compatible devices using Dante Controller or other software tools.
Enable AES70 mode on your RedNet devices using Dante Controller or RedNet Control 2.
Connect your RedNet devices to other AES70-compatible devices using OCA Controller or other software tools.
Once you have done these steps, you will be able to interoperate with other audio networking systems that use AES67 or AES70 standards. You can then use RedNet Control 2 as usual to control and monitor your devices. However, some functions may be limited or unavailable depending on the compatibility and functionality of the other devices. For example, you may not be able to adjust the input and output levels, routing, formats, clock settings, fan behaviour, network configuration, and more if the other devices do not support these functions or use different protocols. You can check the compatibility and functionality of the other devices on their user guides or websites.
How to Use RedNet Control with MIDI Controllers
If you want to use MIDI controllers to control your RedNet devices, such as the mic pre devices, you can use the MIDI bridging feature of RedNet Control 2. The MIDI bridging feature allows you to send and receive MIDI messages between your RedNet devices and your MIDI controllers using a Dante network protocol. To use the MIDI bridging feature, you need to do the following:
Connect your MIDI controllers to your Mac or PC that runs RedNet Control 2 using a USB or MIDI cable.
Launch RedNet Control 2 and go to the Preferences menu.
Select the MIDI tab and enable the MIDI bridging function by clicking on the checkbox.
Select the MIDI input and output ports that correspond to your MIDI controllers from the drop-down menus.
Select the Dante transmit and receive channels that correspond to your RedNet devices from the drop-down menus.
Click on Apply to save your settings.
Once you have done these steps, you will be able to send and receive MIDI messages between your RedNet devices and your MIDI controllers using a Dante network protocol. You can then use your MIDI controllers to control various parameters of your RedNet devices, such as the gain, phantom power, polarity, high-pass filter, air mode, and link mode of the mic pre devices. To do this, you need to use the CC protocol that is defined by Focusrite for each device. The CC protocol specifies which MIDI CC messages correspond to which device parameters and what values they can have. You can find the CC protocol for each device in its user guide or on Focusrite's website.
How to Use RedNet Control with Snapshots
If you want to save, recall, and load device and session snapshots, you can use the snapshot feature of RedNet Control 2. The snapshot feature allows you to store and restore all the settings of a single device or all the devices on your network at any time. To use the snapshot feature, you need to do the following:
Select a device or a group of devices that you want to save as a snapshot by clicking on them in the device list.
Click on the Snapshot button in the top right corner of the window.
Select Save Device Snapshot or Save Session Snapshot from the drop-down menu.
Type a name for your snapshot and click on Save.
Once you have done these steps, you will have saved a snapshot of your device or session settings. You can then recall or load this snapshot at any time by doing the following:
Click on the Snapshot button in the top right corner of the window.
Select Recall Device Snapshot or Recall Session Snapshot from the drop-down menu.
Select a snapshot from the list and click on Recall.
By using these steps, you will have recalled or loaded a snapshot of your device or session settings. You can also delete or rename snapshots by clicking on the Edit button in the snapshot window.
How to Use RedNet Control in Background Mode
If you want to run RedNet Control as a background application, you can use the background mode feature of RedNet Control 2. The background mode feature allows you to minimize RedNet Control to the system tray or menu bar and keep it running in the background without occupying any screen space. To use the background mode feature, you need to do the following:
Launch RedNet Control 2 and go to the Preferences menu.
Select the General tab and enable the background mode function by clicking on the checkbox.
Click on Apply to save your settings.
Once you have done these steps, you will be able to minimize RedNet Control to the system tray or menu bar and keep it running in the background. You can then access RedNet Control by clicking on its icon in the system tray or menu bar. You can also exit RedNet Control by right-clicking on its icon and selecting Quit from the pop-up menu.
By using the background mode feature, you can run RedNet Control as a background application and save some screen space while still being able to control and monitor your devices.
How to Update Your RedNet Devices Firmware
If you want to update your RedNet devices firmware, you can use the firmware update feature of RedNet Control 2. The firmware update feature allows you to identify and update specific devices that require a firmware upgrade. To use the firmware update feature, you need to do the following:
Launch RedNet Control 2 and go to the Help menu.
Select Check for Updates from the drop-down menu.
Wait for RedNet Control 2 to scan your network and identify any devices that require a firmware upgrade.
Select a device from the list and click on Update.
Wait for RedNet Control 2 to download and install the new firmware on the device.
Restart the device when prompted.
Once you have done these steps, you will have updated your device's firmware to the latest version. You can also check the firmware version of each device by clicking on it in the device list and looking at the Firmware Version field in the control panel.
Conclusion
RedNet Control 2 is a powerful software that allows you to control, monitor, and manage your networked audio devices with ease and efficiency. It has a user-friendly interface that lets you access all the features and settings of your devices using a Dante network protocol. It also has various features and functions that let you create and manage custom mixes, use MIDI controllers, save and recall snapshots, use DDM, AES67, and AES70 standards, run in background mode, and update your devices firmware. With RedNet Control 2, you can enhance your workflow and productivity and get the most out of your networked audio devices.
Frequently Asked Questions
Here are some of the most common questions that users have about RedNet Control 2:
Q: What are the system requirements for RedNet Control 2?
A: The system requirements for RedNet Control 2 are as follows:
Mac: macOS 10.13 or higher, Intel Core i5 processor or higher, 4 GB RAM or higher, 1 GB free disk space or higher
PC: Windows 10 or higher, Intel Core i5 processor or higher, 4 GB RAM or higher, 1 GB free disk space or higher
Dante network: Dante Controller software, Dante Virtual Soundcard software (optional), Gigabit Ethernet switch with PoE (optional)
Q: How do I get support for RedNet Control 2?
A: If you need any help or support for RedNet Control 2, you can contact Focusrite's customer support team by visiting their website and filling out a support ticket. You can also find more information and resources about RedNet Control 2 on their website, such as user guides, videos, tutorials, FAQs, and forums.
Q: How do I get updates for RedNet Control 2?
A: If you want to get updates for RedNet Control 2, you can check for updates manually by going to the Help menu and selecting Check for Updates. You can also enable automatic updates by going to the Preferences menu and selecting the General tab. You can then choose how often you want RedNet Control 2 to check for updates and whether you want it to download and install them automatically or notify you first.
Q: How do I uninstall RedNet Control 2?
A: If you want to uninstall RedNet Control 2 from your Mac or PC, you can do so by following these steps:
For Mac users:
Quit RedNet Control 2 if it is running.
Open the Applications folder and drag the RedNet Control icon to the Trash.
Empty the Trash.
For PC users:
Quit RedNet Control 2 if it is running.
Open the Control Panel and select Programs and Features.
Select RedNet Control from the list of programs and click on Uninstall.
Follow the uninstallation steps provided by the installer.
Restart your computer if prompted.
Q: How do I backup and restore my RedNet Control 2 settings?
A: If you want to backup and restore your RedNet Control 2 settings, such as your tabs, device names, device settings, and snapshots, you can do so by following these steps:
For Mac users:
Quit RedNet Control 2 if it is running.
Open the Finder and go to the Library folder in your home directory.
Go to the Application Support folder and find the RedNet Control folder.
Copy the RedNet Control folder to a safe location, such as an external drive or a cloud service.
To restore your settings, copy the RedNet Control folder back to the Application Support folder and overwrite the existing one.
For PC users:
Quit RedNet Control 2 if it is running.
Open the File Explorer and go to the C:\Users\YourUserName\AppData\Roaming folder.
Find the RedNet Control folder and copy it to a safe location, such as an external drive or a cloud service.
To restore your settings, copy the RedNet Control folder back to the AppData\Roaming folder and overwrite the existing one.
44f88ac181
Comments